|
|
Insulated roller shutters using steel rolled twin section lath, each section is 100mm deep with ribbed face providing increased rigidity and encapsulating a layer of insulation. Each panel is terminated with a hardwearing nylon end fitting. The bottom of the curtain incorporates a yellow extrusion with interlocking rubber weather seal. Optional aluminium version with high speed drive 500mm per second. Insulation value is 69W/M.sq.K
Ask for datasheet 207
Insulated sectional overhead doors with door panels formed from galvanised steel sheets bonded together with high density C.F.C.free polyurethane foam to provide a 'U' value of 0.44 W/mēK with a thermal break between panels.
Vertical and horizontal tracks, hinges, brackets, cappings and hardware are galvanised, with the assembled door running on adjustable galvanised roller carriers, bolted to each individual panel. Each door is counterbalanced by means of tempered helical springs at high level, mounted on bright steel plates with self aligning roller bearings for smooth quiet operation. Cable tensioning devices are fitted as standard to all doors.
Rubber seals are fitted to the top and bottom of each door
with P.V.C. seals to each side of the opening for protection
against weather..
Ask for datasheet 400
Insulated bi-folding doors using the Swift side-hung bi-folding door. Manufactured using high quality components and fully complying with the current European safety standards, our Bi-folding doors has been restyled to combine its original robust design with more modern, aesthetic appearance.
Ask for datasheet 330
|
| |
|
|
|
|
